Acer Aspire 5935 Series - Replacing the LCD Module

Chapter 3 115
Replacing the LCD Module
1. Align the LCD hinges with the lower case and replace the LCD module.
2. Replace the four securing screws (two each side), starting with the left side hinge.
NOTE: Two different screw sizes are used to secure the LCD module in place. The red callouts require
M2.5*8 screws and the green callouts require M2.5*6 screws.
3. Run the microphone cable along the cable channel
using all the available cable clips.
4. Connect the microphone cable to the Mainboard as
shown.