Chapter 3 75
Removing the Switch Cover
1. See “Removing the Battery Pack” on page 56.
2. Turn the computer over. Remove the thirteen screws securing the Switch Cover to the Upper Cover.
IMPORTANT: Do not lift the Switch Cover away from the computer; the Power Board FFC is still connected.
3. Turn the computer over and open the LCD Panel. Lift the Switch Cover, rear edge first, as shown.
Step Size Quantity Screw Type
Switch Cover
(red callout)
M2.5*6.5 9
Switch Cover
(green callout)
M2.5*4 4
To Next Page
Loading...
