Chapter 2 15
Power Management Setup
Parameter Description Option
ACPI Aware O/S Enables or disables the Advanced Configuration and Power
Management (ACPI) function.
Enabled
Disabled
ACPI Suspend Mode Select an ACPI state. S3 (STR)
S1 (POS)
Power On by PCIE Devices Enables or disables to wake up the system from a power saving mode
through an event on PCI Express device.
Enabled
Disabled
Power On by Modem Ring Enables or disable to wake the system by ring function. Enabled
Disabled
Wake Up by PS/2 KB/Mouse Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard or mouse.
Enabled
Disabled
Wake Up by USB KB/Mouse If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enabled
Disabled
Restore On AC Power Loss Enables or disables the system to reboot after a power failure or
interrupt occurs.
Power Off
Power On
Last State
To Next Page
Loading...
