Chapter 3 43
Removing the VGA Card (X1700 model)
1. See “Removing the Side Panel” on page 28.
2. See “Removing the Front Bezel” on page 29.
3. See “Removing the Heat Sink Fan Assembly” on page 30.
4. See “Removing the Processor” on page 32.
5. See “Removing the Optical Drive” on page 34.
6. See “Removing the Hard Disk Drive” on page 37.
7. Remove the screw (E) that secures the card to the chassis.
8. Gently pull the card to remove it from the mainboard.
Screw (Quantity) Color Torque Part No.
#6-32 5MM NI (1) Silver 5.5 to 6.5 kgf-cm 86.9A5G6.162
To Next Page
Loading...
