97
4 Click Calendar.
5 Select a day or days in the Calendar, then click Add.
6 Under Uptime start, set a start time to keep the server running.
7 Enable the “Wake up from suspension” option if you want to
bring the home server out of standby on the defined time.
8 Under Uptime end, set an end time to disable the server.
9 Select from the following end actions:
• Do nothing - This is not useful for a standalone end action.
• Suspend - Puts your server into suspend mode.
• Shut down - Shuts down and powers off the server.
To Next Page
Loading...
