2-3:Create a“RAID Ready” System into" RAID 5" with three Hard Drives by‘Create RAID Volume from
Existing HDD Drive ’.
Step 1:
Install Vista OS with one SATA HDD.
Step 2:
Shut down the system,then add other two serial ATA hard drives in the system.
Step 3:
Boot to OS desktop, open the Intel® Matrix Storage Console.
Step 4:
Click on the by‘Create RAID Volume from Existing HDD Drive ’ to create a RAID
Step 5:
Click "Next" at create a RAID volume window.
Step 6:
Key the name in "Volume Name" and select "RAID 5" in RAID Level.
Picture11
Step 7:
Select minimum HDD as "Source Hard Drive".
Picture12
To Next Page
Loading...
