Step 1:
Step 2:
Step 3:
Step 4:
Picture1
Step 5:
Step 6:
At "Integrated_Peripherals" page "OnChip SATA Type" item set is as "RAID" mode,save
and exit.
During BIOS post, press <Ctrl-I> to enter into Intel RAID setup utility,as picture1.
Select "1" to enter create RAID mode ,if there is no enough avalable space (there was exist a
Raid , delete it ).
Intel RAID SOP
1. INTEL® MATRIX STORAGE TECHNOLOGY CHECK (DOS)
1-1: Create SATA RAID 0
Shut down the EUT, unplug the power cable,connect two SATA HDDS to EUT , check the
EUT all devices are connect/plug ok
Press "PWR-BTTN" to power on the EUT,Load BIOS default setting .
Create RAID 0 Mode,enter the RAID name,such as "MyRaid0",default is"Volume0".
To Next Page
Loading...
