4 Chapter 1
System BIOS
• Type:
• Use SPI Flash
• Size:2MB
• Kernel:AMI Kernel with Acer skin
Power supply
• 500W/300W/250W in stable mode (Acer Assign System Power Unit)
• Design for Intel G43 series chipset compatible system
• Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to 12V output capability)
• Demand for both PFC/Non-PFC solutions (two different quotations are needed)
• Minimum 4 Serial ATA power connector solution should be included (by default)
• Minimum 3 big 4-pin power connector included
• Minimum 1 small 4-pin power connector included
• PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe
and China
• Non-PFC version should provide switch selector for 115/230V AC input and universal for worldwide
• PS2 style
• EupLot6 support
To Next Page
Loading...
