Acer Aspire T180 - PC Health Status

Chapter 2 42
PC Health Status
The following table describes the parameters found in this menu:
Parameter Description Options
System Component
Characteristics
These items allow users to monitor data provided
by the BIOS on this motherboard. These fields can
not be changed.
T Vcore
T Voltage Battery
T CPU FAN Speed
T System FAN Speed
T Current System Temperature
T Current CPU Temperature
CPU Shutdown
Temperature
This item enables users to set the maximum
temperature the system can reach before powering
down.
60
o
C/140
o
F
70
o
C/158
o
F
80
o
C/176
o
F
90
o
C/194
o
F
Warning Temperature This item lets you select the temperature at which
you want the system to send out a warning
message to the PC speakers of when the
temperature goes beyond either limit.
Disabled
Smart FAN Control SPU/SYS Smart Fan Function
-- This item allows you to enable/disable the control
of the CPU/system fan speed by changing by
changing the fan parameter.
Press Enter
Phoenix-Award WorkstationBIOS CMOS Setup Utility
PC Health Status
Item Help
f
Menu Level
mnlk
F5:Previous Values F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
CPU Vcore 1.29V
+3.3V 3.37V
+5V 5.00V
+12V 11.61V
+5VSB 5.05V
Voltage Battery 3.00V
VDIMM 1.77V
Current CPU Temperature 29°C
Current SYSTEMTemperature 31°C
CPU Fan Speed 5232 RPM
System Fan Speed 0 RPM
Shutdown Temperature [Disabled]
Warning Temperature [Disabled]
Smart Fan Function [Press Enter]
f