Service and Maintenance 5-51
5. Perform the following:
a. Route the auxillary antenna cable (A, white) by the white line on the left side of the
mainboard until it pass through the mainboard hole (C).
b. Route the main antenna cable (B, black) by the white line on the right side of the
mainboard until it pass through the mainboard hole (D).
c. Attach the adhesive tapes to fix the antenna cables on the respective white lines.
Figure 5:75. Routing the Antenna Cables
6. Route the main (black) and the auxillary (white) antenna cables on the guides on the lower
case.
Figure 5:76. Routing the Antenna Cables (2 of 2)
To Next Page
Loading...
