Acer Aspire V3-551 - Crisis Utility SOP

System Utilities 2-24
Crisis Utility SOP
Creating a USB Flash Crisis Disk
To create a Crisis USB flash disk, perform the following:
1. Plug in the USB flash disk.
2. Format the USB flash disk, do the following:
a. launch Windows Explorer or press + <E>. Right-click on the USB flash disk, then select
Format.
Figure 2:32. Format USB Flash Disk (1 of 2)
b. Select Quick Format, then click Start and then OK.
Figure 2:33. Format USB Flash Disk (2 of 2)
3. Unzip the DOS mode flash package (*.7z). It contains several files.
4. In Windows, copy the ROM (*.fd) file to the USB flash disk root directory.
NOTE:
Do not save another ROM (*.fd) file in the USB flash disk root directory.
5. Rename the ROM file to “BIOS.FD”.