Machine Maintenance Procedures 3-27
Touchpad Removal 0
Prerequisite:
Mainboard Removal
1. Disconnect touchpad FPC (B) from the touchpad connector (A) (Figure 3-22).
2. Remove the touchpad FPC (B) from the top assembly (Figure 3-22).
3. Remove five (5) screws (C) securing the touchpad in place (Figure 3-22).
Figure 3-22. Touchpad
4. Remove the touchpad as shown in Figure 3-23.
Figure 3-23. Touchpad Removal
To Next Page
Loading...
