Acer Aspire V7-581 - Clickpad Basics

1-22 Hardware Specifications and Configurations
Clickpad Basics 0
Figure 1-8. Clickpad
Move your finger across the Clickpad (1) to move the cursor.
Press the left (2) and right (3) button areas located beneath the Clickpad to
perform selection and execution functions. These two button areas are the
equivalent of the left and right buttons on a mouse. Tapping on the Clickpad is
the same as clicking the left button.
Function Main Clickpad (1) Left Button Area (2) Right Button Area (3)
Execute Tap twice (at the same speed
as double-clicking a mouse
button).
Quickly click twice.
Select Tap once. Click once.
Drag Tap twice (at the same speed
as double-clicking a mouse
button); rest your finger on
the Clickpad on the second
tap and drag the cursor.
Click and hold,
then use finger on
the Clickpad to
drag the cursor.
Access
context menu
Click once.
NOTE:
When using the Clickpad, keep it - and fingers - dry and clean. The Clickpad is sensitive
to finger movement; hence, the lighter the touch, the better the response. Tapping too
hard will not increase the Clickpad’s responsiveness.
1
23