Machine Maintenance Procedures 3-75
Replacing the Touchpad 0
1. Place the touchpad on the top assembly as shown in Figure 3-87.
Figure 3-87. Replacing the Touchpad
2. Install and secure five (5) screws (C) securing the touchpad in place (Figure 3-88).
3. Connect the touchpad FPC (B) to the touchpad connector (A) (Figure 3-88).
Figure 3-88. Touchpad
ID Size Torque Quantity Screw Type
C M2.0*3.0 2.0±0.2KGF/CM 5
To Next Page
Loading...
