2-26 System Utilities
Figure 2-38. DQDMI
9. Enter DQDMI S and press
Enter
to write the MAC ID to the EEPROM. The system will
reboot.
10. Press
F2
during boot to enter the BIOS setup. Press
F9
to load the default and then
press
F10
to save and exit BIOS setup and reboot the system.
11. In Windows 8, press the
Windows Key + X
.
Figure 2-39. Window 8 Show Menu
12. Select Command Prompt (Admin) to open a command window.
Figure 2-40. Window 8 Command Prompt
13. Enter ipconfig /all and press
Enter
.
To Next Page
Loading...
