8 Chapter 1
Memory Combinations
System Memory
SATA Interface
USB Port
Slot Memory Total Memory
Slot 1 1GB,2GB,4GB 1G ~4GB
Slot 2 1GB,2GB,4GB 1G ~4GB
Maximum System Memory Supported 1G~8GB
Item Specification
Memory slot number 2 slot
Support Memory size per socket 1GB/2GB/4GB
Support memory type DDRIII
Support memory interface DDRIII 1066/1333MHz
Support memory voltage 1.5V
Support memory module package 240-pin DDRIII
Support to parity check feature Yes
Support to error correction code (ECC) feature No
Memory module combinations You can install memory modules in any combination as long as
they match the above specifications.
Item Specification
SATA controller AMD A75
Number of SATA channel SATA X 3(SATA 6Gb/s)
Support mode AHCI/IDE mode option
Item Specification
Universal HCI USB 2.0/1.1 or USB 3.0
USB Class Support legacy keyboard for legacy mode
USB Connectors Quantity 4 USB2.0 ports locate on MB rear side.
2 USB3.0 ports locate on MB rear side.
4 USB2.0 ports locate in Chassis top side.
All USB ports must be boot-capable includes USB-ODD, USB-HDD, USB-
FDD, and etc…
All USB ports must be 2.0 certified.
All USB ports must provide the over current protection.
USB3.0 ports must be 3.0 certified.
To Next Page
Loading...
