Chapter 1 29
OSD Navigation
Many of the advanced settings and adjustments are available through using the OSD (on screen display)
menus, as shown in the example screenshot below.
Basic operations required ot navigate these menus (Picture, Audio, Settings, Options, Empowering) are
described in this section. The first time you access the OSD, you will be asked to choose your language
settings.
NOTE: You can also interact with these menus using the front panel controls.
Navigating the OSD with Remote Control
There are five main OSD menus. These are: Picture , Audio , Settings , Options and
Empowering . Use the following method to easily navigate these menus.
1. Press the “Menu” button on the remote control or the “Menu” button on the control panel.
2. Select your desired menu by using the Left/Right sides of the directional pad ot switch between the five
menus.
3. Use the directional pad to interact with the menu. The Up/Down directions will scroll through the menu
options, while Left/Right will adjust the different settings (for example, in the Picture menu, settings such
as brightness, contrast, etc). If there are no adjustments, press Enter to select.
To Next Page
Loading...
