36 Chapter 1
Hard / Soft Performance
1. Languages
supported
Czech, Danish, Dutch, English, French, German, Italian, Polish,
Portuguese, Russian, Spanish and Swedish
2.
Starting time
A correct picture (color, aspect ratio, stability) can be displayed <6
second after power on
3. Wake-up behaviour
The system can be waken up if the button Standby is pressed
(keypad “power” or remote control “power”, “0 ~ 9”, “CH +/-”).
4. Stand-by reason
The TV pass in standby mode upon:
• The button “power” is pressed (keypad or remote control).
• On the selected source: no sync signal after 8 minutes.
5. Video and Audio Characteristics
6. Scanning mode
Automatic:
• Multi-standard, frequency based
• Level range: 55dBuV to 100dBuV
• Abort possible during scanning
process
Manual:
• Frequency setting is available.
7. Analog TV naming
function
Automatic:
Manual:
CNI recognition
5 characters
8.
PIP / POP / PBP
function
PIP
PIP multiple size
PIP multiple position
POP
POP source
POP (main + sub)
20%, 30%
4 corners
video / graphic (main) by ATV (sub)
1 + 5, 1 + 12
Multi Picture
AT3220 series only supports video on graphic (VGA) multi-picture function.
The configuration for multi-picture is listed and described as following:
No. PARAMETER ( Channel: 11 ) MIN. TYP. MAX. UNIT NOTE
1 Video output level 0.8 1.0 1.2 Vp-p 1
2 Video S/N 44 48 - dB 2
3 Noise limiting sensitivity - 44 49 dBuV 3
1.0 MHz -2.0 0 +2.0 dB
2.0 MHz -2.0 0 +2.0 dB
3.0 MHz -3.0 -0.5 +1.0 dB
4
Video amplitude frequency
characteristics
3.58 MHz -4.5 -1.5 +0.5 dB
4
5 Audio output level 140 140 290 440 mVrms 5
6 Audio S/N 40 48 - dB 6
To Next Page
Loading...
