Acer AT3265 - Basic Connections; Connecting the Power Cord; Setting Up the Remote Control

English
9
Connecting the power cord
1 Connect the AC cord to the AC input on the back of the TV.
2 Connect the plug to the wall outlet as shown.
Basic connections
Setting up the remote control
1 Open the cover on the bottom of the remote unit.
2 Insert two AA batteries (supplied) to match the polarity indicated inside the battery
compartment.
A certified power cord that meets your country's legal requirements must be
used with this TV. You may also use an ordinary polyvinyl cord that meets
IEC 60227 requirements or a synthetic rubber cord that meets IEC 60245
requirements.