31
Troubleshooting
This chapter provides troubleshooting information for the B223W:
1. No Power
Cha
ter 4
No power
Press power key and look if the
picture is normal
Please reinsert and make sure the
5V and 12V input is normal
Reinsert or check the
ower section
Check X201 oscillate waveforms
are normal
Measure U701 Pin2=3.3V and U702 PIN2=1.8V
OK
OK
NG
NG
NG
Check CN401 or
replace U701,U702
Check U202
Replace X201
OK
NG