EN-12
Adjusting the OSD settings
The OSD (on-screen display) can be used for adjusting the settings of your LCD
Monitor. Press the MENU button to open the OSD. You can use the OSD to
adjust the picture quality, OSD position and general settings. For advanced
settings, please refer to following page:
Main Page
The default function for buttons 1 and 2 are Modes and Brightness. You can
use the Hot Key Assignment function to set these buttons to your preferred
functions.
Note: The following content is for general reference only. Actual
product specifications may vary.
Note: This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be achieved.
Changing the factory default picture settings or enabling other
features will increase power consumption that could exceed the limits
necessary to qualify for ENERGY STAR rating.
1. Modes
2. Brightness
3. Input
4. Menu
To Next Page
Loading...
Need help?
General
