How to Connect Your Device to play music via Bluetooth
About Auto Portrait Mode
Turn on the projector, select the Bluetooth on home menu of projector to enter Bluetooth
connecting standby page. (Or, long press ENTER key on projector to Enter Bluetooth music
mode after powering on projector.)
Turn on Bluetooth on your mobile and search SSID shown on standby page.
When connecting successfully, you will hear the system sounds. Then, optical engine turns
off automatically and enter Bluetooth music mode. You can start to play your music.
Press “Power” key on projector or “BACK” key on remote controller to exit Bluetooth music
mode.
For mobile, it supports auto portrait mode and displays full-screen projection automatically
via wireless projection and USB plug-and-play (via USB cable) when both of mobile and
projector are displayed by portrait mode.
If both of mobile and projector are displayed by landscape mode, we suggest you to use
landscape mode to get full-screen projection.
For HDMI or Type-C, it doesn’t support portrait Mode.
Projector / Mobile
Projector - landscape mode
Projector - portrait mode
Mobile - landscape mode
❶
❸
Mobile - portrait mode
❷
❹
(1)
(2)
(3)
(4)
(1)
(2)
(3)
To Next Page
Loading...
