Disassembly Procedures 1-15
5. Remove four (4) screws (G) securing the touchpad module in place (Figure 1-20).
Figure 1-20. Touchpad Module Screw Location
6. Lift up the touchpad bracket to remove the touchpad module (D) from the top
assembly (Figure 1-21).
Figure 1-21. Touchpad Module Removal
Touchpad FPC (Flexible Printed Circuit) can be damaged if removed while the
mainboard connector and touchpad connector are locked.
D
WEEE Annex VII Component: Touchpad Module
To Next Page
Loading...
