1-14 Disassembly Procedures
Touchpad Module Removal 0
Prerequisite:
Battery Pack Removal
1. Find the touchpad module (D) on the top assembly. Refer to Figure 1-10.
2. Peel off and remove the tape (A) on the touchpad connector (Figure 1-18).
Figure 1-18. Touchpad FPC Removal
3. Disconnect and remove the touchpad FPC (E) from the mainboard connector (B) and
the touchpad module connector (C) (Figure 1-19).
4. Gently flip the bottom edge of the keyboard plate mylar (F) away from the touchpad
module (Figure 1-19).
Figure 1-19. Touchpad FPC Removal