Acer Connect M5 - 7.3 Settings

To Next Page

To Previous Page

7.3 Settings – Firmware Update

Firmware update

Click Check for updates. Your Acer Connect M5 device will check if there is an update available.

If new firmware is found, you may click Download to begin the update. The firmware update will

take approximately 4 minutes to complete.

Note: To do Firmware update, the Acer Connect M5 device must with more than 30% battery.

Please do not power off your Acer Connect M5 device during the update process as this may

damage it.

Acer Connect M5 - 7.3 Settings - Firmware Update