Acer ED273UR User Manual

LCD Monitor Quick Setup Guide
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
Package contents
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the monitor, attach the base to the footstand.
3.
Secure the base to the stand by turn the screw clockwise using a screwdriver or a suitable coin.
1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the LCD monitor outside this range may result
in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
•
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
• Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
External controls
Function key a. Monitor power off status Press to switch power on. In the normal display,
anytime to Press more than 5 seconds switch to turn off the power.
b.
Blue indicates power on. Amber flicker indicates standby/power
saving mode. No light display indicates Power off.
c. Press to any directions switch key to display First Menu. Press again to enter
next function in the First Menu.
d.
The single toggle button on the backside of the Display bezel operates like
a joystick. To move the cursor, simply toggle the button in four directions.
Press the button to select desires option. In Main Menu , Bright grey
indicates operable, Dark grey indicates inoperable.
Connecting Your Monitor to a Computer
1. Turn off your monitor and unplug your computer’s power cord.
2.
2-1 DVI-DL Cable (Optional, only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b.
Connect the DVI-DL cable to the computer.
2-2 Connect DP cable(Optional, Only DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
2-3 Connect HDMI cable(Optional,Only HDMI-input model)
a.
Make sure both the monitor and computer are powered-OFF .
b. Connect the HDMI cable to the computer.
3. Insert the monitor power cable into the power port under the monitor.
4. Plug the power cord of your computer and your monitor into a nearby
electrical outlet.
LCD monitor Power cord
DVI cable
(Optional)
HDMI cable
(Optional)
Quick start
guide
Adapter
DP cable
(Optional)
Adapter
DVI-IN
HDMI
DC-IN
DP
AUDIO OUT
DP
HDMI
DVI-D

Acer ED273UR Specifications

General

Screen Size	27 inches
Refresh Rate	144 Hz
Panel Type	VA
Aspect Ratio	16:9
Response Time	4 ms (GTG)
Brightness	250 cd/m²
Contrast Ratio	3000:1
Curvature	1800R
Adaptive Sync	AMD FreeSync
Viewing Angle	178° (H) / 178° (V)
Color Support	16.7 Million
Color Gamut	72% NTSC
Resolution	2560 x 1440
VESA Mount	100 x 100mm
Ports	1 x DisplayPort 1.2, 2 x HDMI 2.0, 1 x Audio Line-Out

Summary

Important Safety Instructions

Cleaning the LCD Monitor Screen

Instructions for cleaning the LCD screen gently using a rag and non-solvent solution.

Placement and Environmental Precautions

Advises against placing the monitor near windows or in extreme temperatures to prevent damage.

Handling and Servicing Guidelines

Warns against applying pressure to the screen and performing self-servicing, recommending authorized technicians.

Troubleshooting and Unplugging Procedures

Instructs to unplug and call a technician for issues like frayed cables, liquid spills, or monitor damage.

Package Contents

Attaching Monitor to Base

Connecting Your Monitor to a Computer

Connecting via DVI-DL Cable

Connects the monitor to the computer using a DVI-DL cable, ensuring both are powered off.

Connecting via DP Cable

Connects the monitor to the computer using a DP cable, ensuring both are powered off.

Connecting via HDMI Cable

Connects the monitor to the computer using an HDMI cable, ensuring both are powered off.

Power Connection

Inserts the monitor power cable into the port and plugs into a nearby electrical outlet.

External Controls Overview

Power Button Functionality

Describes how to turn the monitor on/off and indicator light meanings (blue, amber, no light).

Menu Navigation Controls

Explains accessing menus and navigating using the joystick-like button for selections.

FreeSync Technology

Regulatory and Safety Notices

FCC Notice and Interference

Details FCC compliance for Class B digital devices and measures to correct harmful interference.

CE Declaration of Conformity

Acer's declaration of compliance with EU directives for EMC, Low Voltage, and RoHS.

Shielded Cables Requirement

States that all device connections must use shielded cables for EMC compliance.

Peripheral Device Compliance

Only Class B certified peripherals may be attached to maintain EMC compliance.

Caution on Modifications

Warns that unauthorized modifications may void user authority to operate the product.

Canadian Users Notice

States compliance of this Class B digital apparatus with Canadian ICES-003.

Disposal of Waste Equipment

Instructs users to dispose of waste equipment at designated collection points for recycling.