Acer EI292CUR - External Controls Overview; Input and Mode Controls; Brightness and OSD Navigation

LCD Monitor Quick Start Guide - 5
English
External Controls
FreeSync (HDMI1/HDMI2/DP)
It can allow a FreeSync supported graphics source to dynamically adjust
display refresh rate based on typical content frame rates for power efficient,
virtually stutter free and low-latency display.
No. Icon Item Description
1 / Input / Exit
a. Press to toggle input sources.
b. When the OSD menu is enabled, press
to exit the current menu and go back one
level.
2 / Mode / Enter
a. Press to trigger Mode control.
b. When the OSD menu is enabled, press
to enter to next level.
3 / Brightness/+
a. Press the key to open the Brightness
control.
b. When the OSD menu is enabled, press
to select or return to the previous menu.
4 / OSD functions/-
a. Press to view the OSD.
b. When the OSD menu is enabled, press
to select or go to the next menu.
5 POWER Power button
Turns the monitor on/off. Blue indicates
power on.
Blinking Blue indicates standby mode.