Acer ExtensaTM 670 - Using Indicator Lights

Using Indicator Lights
2-10
The computer uses the following indicator lights.
LCD Panel Indicator Lights
Power/
Battery-low
Indicator
Lights when the computer is on and
there is power to the computer.
Flashes when the battery power is low.
Connect a powered AC adapter to the
computer as soon as possible.
Standby
Mode
Indicator
Lights when the computer is in Standby
mode. Flashes when the computer is in
5V Suspend mode.
The computer enters Standby mode if
the Standby hot key (Fn+F4) is pressed
or the STANDBY TIMEOUT parameter in
Setup is enabled and expires.
The computer enters 5V Suspend mode
when you press the 5V Suspend hot key
(FN+F3), the 5 VOLT SUSPEND TIMEOUT
parameter in Setup is enabled and
expires, or the display is closed.
Standby
Mode
Indicator
Power/
Battery-Low
Indicator