Using Disk Drives
2-22
3. Insert another module into the bay, pushing
the module in until it clicks into place.
4. Latch the module by pushing the module lock
towards the lock icon .
Replacing a Module
Note: You will not be able to access the module
unless your module is locked.
Connecting the Floppy Disk
Drive Externally
You can use your floppy disk drive module
externally through a connection to the parallel
port. This allows you to use a CD-ROM drive
and a floppy disk drive simultaneously. To
connect the floppy disk drive to your computer,
follow these steps.
To Next Page
Loading...
