8
Frequently Asked
Frequently Asked Frequently Asked
Frequently Asked
Questions (FAQ)
Questions (FAQ)Questions (FAQ)
Questions (FAQ)
The image is blurred:
- Read the chapter, Installation/Adjustment and then select the correct
resolution, refresh rate and make adjustments based on these
instructions.
- Do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not,
optimise the image working on the description in the chapter,
Installation/Adjustment. It is normal for blurring to occur due to
conduction losses in extension cables. You can minimise these losses by
using an extension cable with better conduction quality or with a built-in
booster.
- Does the blurring only occur at resolutions lower than the native
(maximum) resolution?
Read the chapter Installation/Adjustment. Select the native resolution.
Pixel errors can be seen:
- One of several pixels are permanently black, one or more pixels are
permanently white, one or more pixels are permanently red, green, blue
or another color.
Read the chapter “Pixel error”.
The image has a faulty color appearance:
- It has a yellowey, bluey or pink appearance.
On the monitor press the "Enter" button and using the Left/Right key
move to the "Miscellaneous" menu. Select the "Recall" item and press
"Enter". If the image is still not correct and the OSD also has a fault color
appearance, then one of the three primary colors is missing in the signal
input. Now check the VGA cable contacts. If any pins are bent or broken
off, then contact your dealer or read the chapters for additional help and
service.
4
To Next Page
Loading...
