What to do if my Acer G235HL has no picture?
If your Acer monitor displays no picture, try these steps: First, use the OSD to maximize brightness and contrast or revert to default settings. Then, verify the power switch is on and the AC power cord is securely connected to the monitor. Also, ensure the video signal cable is properly connected at the back, and confirm that your computer system is powered on.
Why does my Acer G235HL have an abnormal picture?
An abnormal picture on your Acer monitor can occur due to several reasons. The graphics adapter and monitor specifications might not be in compliance, leading to an input signal frequency mismatch. To resolve this, use the OSD to adjust RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION, especially with non-standard signals. If the full-screen image is missing, use the OSD to select a different resolution or vertical refresh timing. After adjusting the image size, wait a few seconds before changing the signal cable or powering off the monitor.
How to fix abnormal sound on Acer Monitor?
To address abnormal sound on your Acer Monitor (only for Audio-Input models), first, check if the audio cable is correctly connected to the host PC. If it is, verify that the volume on the host PC isn't set to the minimum. If it is, try increasing the volume level.
General| Screen Size | 23 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | VGA, DVI |
| Viewing Angle | 170° horizontal, 160° vertical |
| Power Consumption | 25W (operational), 0.5W (standby) |
To Next Page
