5
The LCD monitor will contain a main board and a key board which house the flat panel control logic,
brightness control logic and DDC. The adapter will provide AC to DC voltage to drive the main board chips
each voltage. The function key board is used for OSD control, monitor power ON/OFF and the LED indicator
for power status.
LCD Panel
Driving system TFT Color LCD
Pixel pitch 0.0884*RGB(H)mm x 0.2652(V)mm
Contrast Ratio 1000(typ) /700(min)
Response time 14ms (Typ.). 28ms(max)
Luminance of White 250 cd/m2
Input
Separate Sync. H/V TTL
H-Frequency 30kHz-83kHz
V-Frequency 56-75Hz
Viewing angle
H:178/ V:178(typ); H:170/ V:170(Min) (CR＞10)
Display mode 1920 x 1080, 60 Hz
EPA ENERGY STAR®
ON Mode < 48W
OFF Mode < 2W
Power Source
100 V ~ 240 V, 50 3Hz, 60 3Hz
Environmental
Considerations
Operating Temp: 0° to 40°C
Storage Temp: -20° to 60°C
Operating Humidity: 15% to 90%
Storage Humidity: 15% to 90%
Operating Altitude: 12,000 feet
Storage Altitude: 40,000 feet
Peak surge current < 55A peak at 240 VAC and cold starting
Power line surge
No advance effects (no loss of information or defect) with a maximum of 1 half-wave
missing per second
To Next Page
Loading...
