Hardware Specifications and Configurations 1-17
Audio Amplifier IC
LED 10.1”
Item Specification
Amplifier IC APA2010HAI-TRG
Feature
• Differential & Single-Ended input mode
• Output Power at 1%THD+N
• 2.4W, at VDD=5V, RL=4 ohm (WLCSP-9)
• Output Power at 10%THD+N
• 3.1W, at VDD=5V, RL=4 ohm (WLCSP-9)
• No external output L-C filter required
• The gain of the APA2010 has been set by the external
resistors (Rin)
• Speaker amplifier power supplies from 2.4V to 5.5V
• Low Shutdown Current IDD=1uA at VDD=5V
• High PSRR: 80dB at 217 Hz
• WLCSP1.5x1.5-9A package
• Fast Startup Time (4ms)
• Less External Components Required
• Thermal and Over-Current Protections
• Operating Voltage: 2.4V-5.5
• High Efficiency up to 90%
• Lead Free and Green Devices Available (RoHS
Compliant)
Item Specification
Vendor/model name
AUO _ B101UAT04 V2
10.1”(10.01”) WXGA 16:10 Color TFT-LCD with LED
Backlight design
Screen Diagonal (mm) 256.42 mm
Active Area (mm) 216.81 mm x 135.5 mm
Display resolution (pixels) 1920 x 3(RGB) x 1200
Pixel Pitch (mm) 0.113 mm x 0.113 mm
Typical White Luminance (cd/m
2
)
also called Brightness
Typ: 350 cd/m
2
(without touch)
Min: 300 cd/m
2
Contrast Ratio Typ: 800
Response Time (Optical Rise
Time/Fall Time, msec)
Typ: 25 mS
Min: 35 mS
Typical Power Consumption (watt) Max: 3.165 W (without touch)
Weight (without inverter/touch
screen)
138g (without touch)
230g (total solution)
Physical Size (mm) 229.95 mm x 149.7 mm x 5.0 max (without touch)
Electrical Interface 2 channel LVDS
To Next Page
Loading...
