Machine Disassembly and Replacement 3-21
Removing the LAN Board 0
1. Disconnect the K/B LED Board Cable, button Board Cable, Disconnect the Connector
Cable and remove 1 screw (M2*4L).
Figure 3-22. LAN Board
2. Tear up the tape, disconnect the K/B FFC and take the LAN Board away.
Figure 3-23. LAN Board
Table 3-11. Screw List
Step Screw Quantity Part No.
LAN Board Disassembly M2*4L (K) 1 86.L080U.002
To Next Page
Loading...
