3-28 Machine Disassembly and Replacement
Replacing the Mother Board Module 0
1. Assemble MB into Pad Bezel in 30 angle on target to CONN of the Bezel, and make sure
screw holes must be targeted to BOSS. And secure 7 screws (M2*4L) on the Motherboard.
Figure 3-31. Mother Board Module
2. Connect the CCD Cable, Mic Cable, GPS BD Cable, Touch BD FFC CONN.
Figure 3-32. Mother Board Module
Table 3-17. Screw List
Step Screw Quantity Part No.
MotherBoard Disassembly M2*4L (K) 7 86.L080U.002
To Next Page
Loading...
