How to fix image flicker on Acer K130?
To resolve image flicker on your Acer Projector, first, execute 'Reset of the OSD Menu.' If the issue persists, ensure that the signal cables and source work well. If the problem continues, check the multimedia board and main board.
What to do if Acer K130 FW upgrade failed?
If the firmware upgrade on your Acer Projector fails, ensure that the signal cables and PC work correctly. Also, check the software program version, the firmware file, and the upgrade process itself. If issues persist, check the main board.
What to do if Acer K130 universal password failure?
Please confirm whether the SNID number of Service Mode is the same as the SNID number on the backside of projector. If not, please do the actions as below: a. Execute the EDID Upgrade Procedure (refer to Chapter 6) b. Execute 'Unlock SNID and Default Language Reset' (refer to 6-5 of Chapter 6) c. Press 'Power', 'Left', 'Left' and 'Menu' buttons sequentially to get into Service Mode to obtain the SNID number, then calculate the Universal Password.
How to recover forgotten admin password on Acer Projector?
An unique Universal Password which is printed on the Security Card. This unique password is a back door of Administrator Password which will be accepted by projector anytime no matter what the Administrator Password is. If you forget the Password, please do the following steps to get the Universal Password: (1) Click the 'AcerSNID' (2) Input SNID number. (SNID number is on the Security Card) (3) Click 'Calculate'. Then the Universal Password will appear.
How to fix audio abnormality on Acer K130?
To fix audio abnormalities on your Acer Projector, first ensure that the signal cables and source work well. If the issue persists, check the FPC cable between the multimedia board and main board, the speaker module, and the main board.
How to resolve dead pixel or dust issues on Acer Projector?
To resolve dead pixel or dust issues on your Acer Projector, ensure the projection screen is free of dirt and that the projection lens is clean. If the issue persists, clean the DMD chip and engine module. Also, check the DMD chip and the engine module.
What to do if Acer K130 function is abnormal?
If your Acer Projector is experiencing abnormal functions, perform a 'Factory Reset' of the OSD Menu. If the issue persists, check the multimedia board and the main board.
How to fix line bar or line defect on Acer K130?
To fix line bars or line defects on your Acer Projector, check if the main board and the DMD board are assembled properly. If the issue persists, check the main board, the DMD board, and the DMD chip.
How to resolve poor uniformity or shadows on Acer Projector?
To address poor uniformity or shadows on your Acer Projector, first ensure the projection screen is free of dirt and that the projection lens is clean. If the issue persists, execute an LED calibration reset. If the problem continues, check the engine module.
Why does my Acer Projector have no power?
If your Acer Projector isn't powering on, make sure the power cord, adapter, and AC outlet are securely connected and not broken. Also, check the FPC cable between the multimedia board and the main board. If the issue persists, inspect the multimedia board and then the main board.
General| Matrix size | 0.45 \ |
|---|---|
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 16:10 |
| Projection distance | 0.64 - 3.4 m |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 31 - 69 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | -40/+40 ° |
| Vertical synchronization (max) | 0.120 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Focal length range | - mm |
| Light source type | LED |
| Service life of light source | 20000 h |
| Full HD | No |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| RMS rated power | 1 W |
| Number of built-in speakers | 1 |
| USB connector type | USB Type-A |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | SD |
| Noise level | 31 dB |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Portable |
| Power source | AC |
| AC input voltage | 110 - 220 V |
| Power consumption (typical) | 81 W |
Weight and Dimensions| Depth | 116 mm |
|---|---|
| Width | 140 mm |
| Height | 41 mm |
| Weight | 1240 g |
Explains how to connect external media devices like USB drives and MicroSD cards to the projector.
Details the specific functions and operations of each button on the projector's remote control.
Describes how to navigate menus, control media playback, adjust volume, and use other essential functions via the remote.
Instructions on how to update the projector's firmware using a Micro SD card.
Step-by-step instructions on how to connect a notebook to the projector wirelessly using the WiFi adapter.
Instructions for downloading, installing, and configuring the Acer eProjection Management software for wireless projection.
Details on configuring WEP and WPA-PSK encryption keys for secure wireless connections.
Provides a list of common problems and their corresponding solutions for projector issues.
To Next Page
