12
English
Wireless Projection via acer USB
WiFi Adapter
Plug in acer USB WiFi adapter in USB type A slot of projector. Change projector
source upto USB A, and screen of projector will as below.
Enable your WLAN of Notebook and select the access point labeled
AcerProjector or AcerProjector XXXX to connect wirelessly. The Server IP
indicates the IP address (192.168.100.10) your projector uses to connect to a
wireless network.
Open the Internet browser or installation CD to download Acer eProjection
Management from the welcome page, and then click Run to launch the
POWER
RESET
USB A1 USB A2
USB B
To Next Page
Loading...
