20
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Problems and Solution
# Problem Solution
1 The projector stops
responding to all
controls
If possible, turn off the projector, then unplug
the power cord and wait at least 30 seconds
before reconnecting power.
2 Image or projector
problems
Please refer to projector CD manual’s
troubleshooting.
3 USB/SD read fail Please make sure the USB device or SD card is
good and well inserted. Remove to try for
several times if necessary.
4 USB drive fail USB does not support USB hub function and
which power consumption is over 500mA.
5 Media file not
found or can’t be
opened in file list
The files by un-supported codec won’t be shown
on file list. Please check the media support table
again in this manual.
To Next Page
Loading...
