Acer M511 - Setting

22
English
Setting
Note: Functions vary depending on model definition.
Source Selection Manual by source menu, Auto by Smart Detection.
HDMI CEC Default is "Off". Choose "On" to enable HDMI CEC function.
Information Display the projector information for Model Name, Input Source,
Signal Type, Display Mode, Serial No., Software Version and QR
code on the screen.
Scan QR code linking to Acer projector portal via mobile.
Reset Reset OSD: Press the "ENTER" button and choose "Yes" to return
the parameters on all menus to the factory default settings.
Reset SMART: Press the "ENTER" button and choose "Yes" to reset
SMART source.