How to fix Acer P1287 Projector when no image appears on screen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Check that the projector lamp has been securely installed. Also, verify that you've removed the lens cap and that the projector is switched on.
What to do if Acer P1287 image is too small or too large?
Try these steps: Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Also, you can press "MENU" on the remote control, go to "Image - -> Aspect Ratio", and try different settings, or press "RATIO" on the remote control to adjust directly.
Why is Acer Projector screen not displaying notebook presentation?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is Acer Projector image out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Finally, make sure the projection screen is within the required distance of 4.9 to 32.0 feet (1.5 to 9.8 meters) (XGA series) / 4.9 to 27.1 feet (1.5 to 8.3 meters) (WXGA series) / 1.6 to 10.9 feet (0.5 to 3.3 meters) (1080p, H6517ST/E145S/HE-801ST series) / 4.9 to 32.2 feet (1.5 to 9.8 meters) (1080p, H6517BD/ E145D/HE-801J series) / 4.3 to 23.3 feet (1.3 to 7.1 meters) (1080p, P5515/N156/PN-805 series) from the projector.
How to fix Acer P1287 image with slanted sides?
Try these solutions to correct slanted sides on your projector image: If possible, reposition the projector so that it is centered on the screen. Alternatively, press the "Keystone / " button on the remote control until the sides are vertical. If the "Keystone" button is unavailable on the remote control, press "MENU" on the remote control, go to "Image - -> Auto Keystone" and choose "Off" on the OSD.
What to do if Acer Projector image is unstable or flickering?
Adjust the "Tracking" to correct it. Change the display color depth settings on your computer.
How to correct reversed image on Acer P1287 Projector?
To correct a reversed image, select "Image --> Projection" on the OSD and adjust the projection direction.
How to fix Acer Projector image stretched when displaying a widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust these settings: If playing a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio and set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
What to do if Acer P1287 Projector stops responding to controls?
If your projector stops responding, turn it off, unplug the power cord, and wait at least 30 seconds before reconnecting the power.
What to do if Acer Projector image has vertical flickering bar?
To address a vertical flickering bar, use "Frequency" to make an adjustment. Check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
Instructions for safely powering down the projector before cleaning procedures.
Guidelines for safely connecting and disconnecting the power supply unit.
Advice on safe placement and accessibility of the power outlet for the projector.
Key do's and don'ts for operating and maintaining the projector.
General safety precautions to maximize the projector's lifespan.
Highlights the key technologies and functionalities of the projector.
Identifies the front and upper side components of the projector.
Guides on how to connect various devices to the projector.
Step-by-step instructions to power on the projector and connect sources.
Detailed steps for safely shutting down the projector.
How to use elevator feet and tilt wheels for height adjustment.
Accessing and using the projector's installation menu for settings.
Steps to open, navigate, and exit OSD menus for various settings.
Selecting preset display modes for different viewing environments.
Options for projector placement (front/rear, ceiling).
Controls for selecting the desired image aspect ratio.
Adjusting image distortion caused by tilting the projector.
Customizing the projector's startup screen display.
Enabling security features like password protection for projector usage.
Optimizing power consumption and fan noise for extended lamp life.
Resetting the lamp hour counter after lamp replacement.
Managing reminders and settings for 3D dust filters.
Controls for increasing or decreasing the audio volume.
Selecting the appropriate 3D format for optimal viewing.
Steps to log into the Acer LAN webpage management interface.
Guide to diagnosing and resolving common projector problems.
Specific solutions for various image display issues.
What to do when the projector lamp fails or makes unusual noises.
Procedure for cleaning the dust filters to ensure proper ventilation.
Supported VGA analog resolutions, frequencies, and timings.
Supported HDMI digital resolutions, frequencies, and timings.
Supported MHL digital resolutions, frequencies, and timings.
Compliance information regarding FCC rules for digital devices.
Regulatory information for Canadian users regarding radio devices.
General| Placement | Ceiling |
|---|---|
| Product type | - |
| Product color | Black |
| Market positioning | Presentation |
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 4:3 |
| Projection distance | 1.5 - 9.8 m |
| Projection technology | DLP |
| Supported aspect ratios | 16:9 |
| Contrast ratio (dynamic) | 17000:1 |
| Screen size compatibility | 38 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -40 - 40 ° |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| 3D | Yes |
| Full HD | No |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1920 x 1200 (WUXGA) |
| Focus | Manual |
| Digital zoom | 2 x |
| Optical zoom | 1.2 x |
| Focal length range | 18.17 - 21.81 mm |
| Aperture range (F-F) | 2.41 - 2.7 |
| Lamp type | UHP |
| Lamp power | 260 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 4000 h |
| RMS rated power | 10 W |
| Number of built-in speakers | 1 |
| USB connector type | Mini-USB B |
| HDMI connector type | Full-size |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 330 W |
| Power consumption (economy mode) | 280 W |
| Noise level | 34 dB |
| Noise level (economic mode) | 29 dB |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC, VGA |
| Remote control type | IR |
Weight and Dimensions| Weight | 2500 g |
|---|
To Next Page
