How to fix Acer Projector when no image appears on screen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Check that the projector lamp has been securely installed. Also, verify that you've removed the lens cap and that the projector is switched on.
What to do if Acer P1387W Projector image is too small or too large?
Try these steps: Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Also, you can press "MENU" on the remote control, go to "Image - -> Aspect Ratio", and try different settings, or press "RATIO" on the remote control to adjust directly.
Why is Acer P1387W screen not displaying notebook presentation?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is Acer Projector image out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Finally, make sure the projection screen is within the required distance of 4.9 to 32.0 feet (1.5 to 9.8 meters) (XGA series) / 4.9 to 27.1 feet (1.5 to 8.3 meters) (WXGA series) / 1.6 to 10.9 feet (0.5 to 3.3 meters) (1080p, H6517ST/E145S/HE-801ST series) / 4.9 to 32.2 feet (1.5 to 9.8 meters) (1080p, H6517BD/ E145D/HE-801J series) / 4.3 to 23.3 feet (1.3 to 7.1 meters) (1080p, P5515/N156/PN-805 series) from the projector.
How to fix Acer Projector image with slanted sides?
Try these solutions to correct slanted sides on your projector image: If possible, reposition the projector so that it is centered on the screen. Alternatively, press the "Keystone / " button on the remote control until the sides are vertical. If the "Keystone" button is unavailable on the remote control, press "MENU" on the remote control, go to "Image - -> Auto Keystone" and choose "Off" on the OSD.
What to do if Acer P1387W Projector image is unstable or flickering?
Adjust the "Tracking" to correct it. Change the display color depth settings on your computer.
How to correct reversed image on Acer Projector?
To correct a reversed image, select "Image --> Projection" on the OSD and adjust the projection direction.
How to fix Acer P1387W image stretched when displaying a widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust these settings: If playing a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio and set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
What to do if Acer P1387W stops responding to controls?
If your projector stops responding, turn it off, unplug the power cord, and wait at least 30 seconds before reconnecting the power.
What to do if Acer Projector image has vertical flickering bar?
To address a vertical flickering bar, use "Frequency" to make an adjustment. Check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
Key safety instructions for operation, disconnection, and general warnings.
Guidelines for safe and proper use of electrical power connections and extensions.
Procedures for servicing and further precautions for safe operation.
Highlights the key technologies and capabilities of the projector.
Lists all the items included in the projector package.
Identifies external components of the projector with a diagram.
Explains the functions of the projector's control panel and remote.
Describes how to use the remote control in MHL mode.
Guides on connecting devices and powering the projector on/off.
Covers height adjustment and optimizing image size/distance.
Navigating installation menus and onscreen display settings.
Options for adjusting display modes, color, and image parameters.
Configuration for startup screen, source lock, and security functions.
Settings for ECO mode, lamp life, audio, and dust filters.
Enables and configures DLP 3D functionality and formats.
How to access and log into the projector's web management interface.
Overview of home, control panel, and network settings via web interface.
Configuration for network parameters and email alerts.
Solutions for common image problems and projector issues.
Explains LED indicators and provides solutions for common problems.
Instructions for cleaning dust filters and replacing the projector lamp.
Guides for ceiling mounting and regulatory/safety information.
Regulatory information and safety warnings related to device operation.
General| Resolution | 1280 x 800 (WXGA) |
|---|---|
| Weight | 2.5 kg |
| Display Type | DLP |
| Screen Size | 30 - 300 inches |
| Aspect Ratio | 16:10 |
| Lamp Life | 5000 hours (Normal mode), 6000 hours (Eco mode) |
| Projection Distance | 1.1 - 10.8 m |
| Input Connectors | HDMI, VGA, USB, Composite Video |
To Next Page
