To Next PageTo Next PageHow to adjust Acer P1150 Projector image size?
If the image from your Acer Projector is too small or too large, you can adjust the zoom lever on the top of the projector. Alternatively, move the projector closer to or further from the screen. You can also press "MENU" on the control panel or remote control, navigate to "Image" > "Aspect Ratio", and try different settings.
How to fix no image on Acer P1150?
If no image appears on your Acer Projector, ensure all cables are correctly connected as described in the "Getting Started" section. Also, check that none of the connector pins are bent or broken and that the projector is switched on.
Why is my Acer Projector image out of focus?
If your Acer Projector image is out of focus, adjust the focus ring on the projector lens. Also, ensure the projection screen is within the required distance.
How to correct slanted image on Acer P1150?
If your Acer Projector image has slanted sides, try repositioning the projector so that it is centered on the screen and below the bottom of the screen. You can also use the Keystone correction keys on the control panel or remote control until the image becomes square. Alternatively, press "MENU" on the control panel or remote control to open the OSD menu.
How to fix image flickering on Acer P1150 Projector?
If your Acer Projector image is unstable or flickering, use the "Tracking" feature to correct it. You may also need to change the display color setting on your computer.
What to do if Acer P1150 image has vertical flickering bar?
If your Acer Projector has a vertical flickering bar, use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
What to do if Acer P1150 Projector stops responding?
If your Acer Projector stops responding to all controls, turn off the projector, unplug the power cord, and wait at least 30 seconds before reconnecting the power. Also, ensure that the control panel lock function is disabled.
Why is Acer P1150 Projector image stretched?
If the image is stretched when displaying a widescreen DVD title on your Acer Projector, change the format to 4:3 using the projector's OSD if you are playing a 4:3 format DVD. If the image remains stretched, adjust the aspect ratio.
How to fix partial image on Acer Projector (PC)?
To resolve a partial, scrolling, or incorrectly displayed image from a PC connected to your Acer Projector, verify that your display resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. If the issue persists, change the monitor display you are using, click the "Change" button under the "Monitor" tab, then click "Show all devices > Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box.
How to fix partial image on Acer Projector (notebooks)?
To correct a partial, scrolling, or incorrectly displayed image on your Acer Projector from notebooks, adjust the resolution of your computer. Press the toggle output settings and restart all equipment including the projector.
General| Placement | Ceiling |
|---|---|
| Product type | Ceiling-mounted projector |
| Product color | White |
| Market positioning | Presentation |
| Mac compatibility | Yes |
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 4:3 |
| Projection distance | 1 - 12 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 20000:1 |
| Screen size compatibility | 22 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Projector brightness (economic mode) | 2880 ANSI lumens |
| 3D | - |
| Full HD | No |
| Analog signal format system | NTSC, PAL, SECAM |
| Focus | Manual |
| Throw ratio | 1.96 - 2.15:1 |
| Digital zoom | 2 x |
| Optical zoom | 1.1 x |
| Focal length range | 22 - 24.1 mm |
| Aperture range (F-F) | 2.56 - 2.68 |
| Lamp type | OSRAM |
| Lamp power | 203 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | - h |
| RMS rated power | 3 W |
| Number of built-in speakers | 1 |
| USB 2.0 ports quantity | 0 |
| VGA (D-Sub) ports quantity | 3 |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 260 W |
| Power consumption (economy mode) | 205 W |
| Noise level | 30 dB |
| Noise level (economic mode) | 26 dB |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 299.5 mm |
| Height | 105.1 mm |
| Weight | 2400 g |
General safety alerts and cautions for product usage, including warnings about water, unstable surfaces, and ventilation.
Extra safety guidelines and warnings for product operation, including lens safety and environmental placement.
General precautions to ensure safe and optimal projector operation.
Overview of the projector's key capabilities and technologies.
