Why does my Acer P1165 have no image?
Ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Check if the projector lamp has been securely installed. Also, make sure the lens door is slid on and the projector is turned on.
What to do if Acer P1165 Projector stops responding?
Turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is my Acer Projector screen not displaying my presentation?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
What to do if Acer P1165 Projector image is out of focus?
First, ensure that the lens door is slid on. Then, adjust the focus ring on the projector lens. Finally, make sure the projection screen is within the required distance of 3.3 to 39.0 feet (1.0 to 11.9 meters) from the projector or 3.3 to 32.9 feet (1.0 to 10.0 meters)(P5370W) from the projector.
What to do if Acer Projector image is too small or too large?
Try adjusting the zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control or on the control panel, go to "Image --> Aspect Ratio" and try different settings.
What to do if my Acer P1165 image is unstable or flickering?
Adjust the "Tracking" to correct the unstable or flickering image. Also, try changing the display color depth settings on your computer.
How to fix partial image on Acer Projector connected to notebook?
Press "RESYNC" on the remote control or control panel. To fix an incorrectly displayed image, adjust the resolution of your computer. You can also press the toggle output settings. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
How to fix partial image on Acer Projector connected to PC?
Press "RESYNC" on the remote control or control panel. For an incorrectly displayed image, verify that your display resolution setting is lower than or equal to SXGA (1280 x 1024) (P1165/P1165P) or SXGA+ (1400 x 1050) (P1265/ P1265P) or UXGA (1600 x 1200) (P5260i/P5270/ P5280/P5370W series).
How to fix slanted sides on Acer P1165 image?
If possible, reposition the projector so that it is centered on the screen. Alternatively, press the "Keystone / " button on the control panel or press the "Keystone / / / " on the remote control until the sides are vertical.
How to fix reversed image on Acer P1165 Projector?
Select "Image --> Projection" on the OSD and adjust the projection direction.
Steps to safely power down the projector for cleaning.
General warnings for safe operation and placement.
Importance of the grounding pin for electrical safety.
Situations necessitating professional servicing of the projector.
Caution against using unapproved parts for repairs or upgrades.
Potential interference with medical devices and pacemakers.
Safety measures in potentially explosive atmospheric conditions.
Guidance on environmentally responsible disposal and recycling.
Information regarding mercury content in projector components.
Critical safety warnings that require immediate attention.
Overview of the projector's main capabilities and technologies.
Instructions for physical connection of the projector to sources.
Step-by-step guide to powering on the projector.
Detailed steps for safely shutting down the projector.
Warnings and procedures after powering off the projector.
How to adjust the projector's vertical position using its feet.
Implementing password protection and timeout intervals.
Setting and managing user and administrator passwords.
General guide for resolving projector problems.
Specific solutions for various image display issues.
Troubleshooting methods for image stability and focus.
Solutions for image distortion and size issues.
Troubleshooting for projector control failure and lamp problems.
Step-by-step guide for replacing the projector's lamp module.
Details on projection technology and supported resolutions.
Supported computer systems and video standards.
Specifications of the projection lens, screen size, and distance.
Details on lamp type, audio, weight, and physical dimensions.
FCC regulations, interference, and compliance information.
General| Number of colors | 16.78 million colors |
|---|---|
| Projection distance | 1 - 11.9 m |
| Vertical scan range | 56 - 85 Hz |
| Horizontal scan range | 31.5 - 100 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 0.58 - 7.62 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | ±40 ° |
| Throw ratio | 1.95 - 2.15:1 |
| Digital zoom | 2 x |
| Aspect ratio | 4:3, 16:9 |
| Power supply | 230 W |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 299 x 229 x 93 mm |
| Power requirements | 100 - 240V |
| Lamp type | P-VIP |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 28 dB |
| Power consumption (standby) | 10 W |
| Market positioning | Presentation |
Weight and Dimensions| Weight | 3000 g |
|---|
To Next Page
