What to do if Acer P1165E image is too small or too large?
Try these steps: 1. Adjust the zoom lever on the top of the projector. 2. Move the projector closer to or further from the screen. 3. Press "MENU" on the remote control or on the control panel, go to "Image setting --> Aspect Ratio" and try different settings.
What to do if Acer P1165E Projector notebook computer screen is not displaying presentation?
If you are using a Microsoft® Windows® based notebook, some notebook PCs may deactivate their own screens when a second display device is in use. Refer to your computer's manual for detailed information on how to reactivate it. If you are using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
What to do if no image appears on Acer P1165E screen?
First, ensure the projector is connected as described in the installation section and that none of the connector pins are bent or broken. Check if the projection lamp has been securely installed. Also, make sure the lens door is slid on and the projector is turned on.
What to do if Acer P1165E Projector image is unstable or flickering?
Try using the "Tracking" feature to correct the image. You may also need to change the display color depth settings on your computer.
What to do if Acer P1165E stops responding to controls?
Turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is my Acer P1165E image out of focus?
First, ensure that the lens door is slid open. Then, adjust the focus ring on the projector lens. Also, verify that the projection screen is within the required distance of 3.3 to 39.4 feet (1.0 to 12.0 meters) from the projector.
How to fix slanted sides on Acer P1165E Projector image?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " button on the control panel or the remote control until the sides are vertical.
How to correct vertical flickering bar on Acer Projector image?
Use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
What to do if Acer P1165E Projector image is reversed?
Select "Image --> Projection" on the OSD and adjust the projection direction.
Why is Acer Projector image stretched when displaying a "widescreen" DVD title?
If you are playing a Letterbox(LBX) format DVD title, change the format to Letterbox(LBX) in the projector OSD. If you are playing a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio and set up the display format to 16:9 (wide) aspect ratio on your DVD player.
To Next Page
General
