To Next PageTo Next PageHow to adjust the display size on my Acer Monitor if it's missing or shifted?
If the image on your Acer Monitor is missing, shifted from the center, or appears too small or too large, use the On-Screen Display (OSD) to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION settings. This is particularly useful for non-standard signals.
What to do if my Acer P166HQL Monitor has no picture and the LED is OFF?
If your Acer Monitor shows no picture and the LED is off, the first step is to check the power switch to ensure it is turned on. This is a common cause of this problem.
Why is my Acer P166HQL Monitor picture unstable?
If your Acer Monitor displays an unstable picture, it might be due to a mismatch between the graphics adapter and monitor specifications, causing an input signal frequency issue. Ensure that the specifications of graphics adapter and monitor are in compliance.
What to do if Acer Monitor has no picture and LED displays amber color?
If your Acer Monitor displays no picture and the LED shows an amber color, check if the video signal cable is properly connected to the back of the monitor. A loose or incorrect connection can cause this issue.
What to do if the full-screen image is missing on my Acer P166HQL?
If you're not getting a full-screen image on your Acer Monitor, use the On-Screen Display (OSD) to select a different resolution or vertical refresh timing. This may help to properly fit the image to the screen.
What to do after adjusting the image size on my Acer Monitor?
If you're adjusting the image size on your Acer Monitor, wait a few seconds after making the adjustments before changing or disconnecting the signal cable, or powering off the monitor. This ensures that the settings are properly applied.
General| Screen Size | 15.6 inches |
|---|---|
| Resolution | 1366 x 768 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Brightness | 200 cd/m² |
| Response Time | 5 ms |
| Ports | VGA |
| Viewing Angle | 90° (H) / 65° (V) |
Read instructions carefully, follow warnings and product markings for future reference.
Ensure power outlet is accessible and close to operator for easy disconnection.
