Need help?Do you have a question about the Acer PM161Q and is the answer not in the manual?
General| 3D | - |
|---|---|
| Screen shape | Flat |
| Response time | 15 ms |
| Display diagonal | 15.6 \ |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | 60 Hz |
| Contrast ratio (dynamic) | 100000000:1 |
| Contrast ratio (typical) | 800:1 |
| Display number of colors | 262000 colors |
| Viewing angle, horizontal | 170 ° |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Tilt angle range | 15 - 35 ° |
| Energy efficiency scale | A to G |
| Power consumption (standby) | - W |
| Power consumption (typical) | 12 W |
| Product color | Black |
| Cables included | AC, Micro-USB, USB |
| VGA (D-Sub) ports quantity | 0 |
| USB Type-C downstream ports quantity | 1 |
Weight and Dimensions| Width (with stand) | 375 mm |
|---|---|
| Height (with stand) | 233 mm |
| Weight (with stand) | 952 g |
| Depth (without stand) | 20 mm |
| Width (without stand) | 376 mm |
| Height (without stand) | 234 mm |
| Weight (without stand) | 771 g |
Information on screen flicker, uneven brightness, pixel blemishes, and afterimage.
Read instructions carefully and keep for future reference. Follow all product warnings.
Unplug monitor before cleaning. Use a soft cloth for screen and cabinet.
Guidelines for connecting/disconnecting power and cables to the monitor and computer.
Gradually increase volume, limit time at high volume, avoid blocking noise.
Do not use near water, on unstable surfaces, block ventilation, insert objects, or spill liquid.
Operate from indicated power, do not rest on cord, use appropriate extension cords.
Use grounded outlets, do not overload. System load < 80% of circuit rating.
Use only supplied cord or compliant replacement meeting specific requirements.
Refer servicing to qualified personnel if cord is damaged, liquid spilled, or product malfunction.
Switch off device in explosive areas, obey signs, avoid sparks near fuel or dust.
Device may contain small parts. Keep out of reach of small children.
Acer is committed to environmental protection and recycling of used equipment.
Do not discard in trash. Recycle electronic devices to minimize pollution.
Some pixels may misfire; this does not constitute a malfunction.
Product supports Sleep mode for display and computer after inactivity.
Avoid eyestrain, headaches, and musculoskeletal disorders from prolonged computer use.
Adjust viewing angle, use footrest, or raise height for maximum comfort.
Rest eyes frequently, take breaks, blink often, and adjust display settings.
Keep display clean, adjust brightness/contrast, and minimize glare.
Use glare filters, visors, and adjust display/lighting to reduce reflections.
Take breaks, stretch, get fresh air, exercise, and maintain a healthy body.
Do not lift the monitor by its base to prevent damage.
Product conforms to EMC Directive 2014/30/EU and relevant standards.
Product conforms to LVD Directive 2014/35/EU and relevant standards.
Product conforms to RoHS Directive 2011/65/EU and relevant standards.
Product conforms to ErP Directive 2009/125/EC and relevant regulations.
Device complies with FCC Part 15 rules, subject to two conditions regarding interference.
Details of the local manufacturer/importer responsible for this declaration.
Check for LCD monitor, cables, and guides. Save packing materials for future transport.
Remove bracket and base from packaging, place on stable surface, adjust viewing angle.
Monitor enters power saving mode indicated by orange LED. Recovers in ~3 seconds.
Enables plug-and-play by informing host system of monitor capabilities via DDC2B.
Detailed pin assignment for the Type C (24Pin female connector).
Table lists supported modes, resolutions (e.g., VGA, VESA, UXGA), and refresh rates (Hz).
Connect via Thunderbolt 3 (USB-C) cable. No external power needed for computer connection.
Connect via Type-C cable. Some phones may need external power via micro USB.
Turns monitor on/off. Blue LED indicates power on, Amber indicates standby/power saving.
Details on using OSD functions, Exit, Picture Mode, Up/Right, Down/Left, and Confirm buttons.
Use OSD to adjust Brightness (0-100), Contrast (0-100), Sharpness (0-100), and Overdrive.
Select color modes like Cool, Normal, Warm, User Define, or Preset Mode.
Choose OSD language from a list including English, Français, Deutsch, and Japanese.
Adjust OSD H/V Position, Background, and Time Out settings via the OSD menu.
Access Information and Memory Recall functions within the Setup Menu.
Check power switch, connections, and adjust OSD settings for brightness/contrast.
Check power cord, video signal cable, and computer power saving/standby mode.
Check display settings, resolution, refresh rate, or wait after image size adjustment.
To Next Page
