EasyManuals Logo

Acer PD1330W Series User Manual

Acer PD1330W Series
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
vi
may cause the fan(s) to operate in standby mode.
Locations where the altitudes are higher than 10000 feet.
Unplug immediately if there is something wrong with your projector. Do
no
t operate if smoke, strange noise or odor comes out of your proj
ector. It
mig
ht cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its coo
ling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
proj
ector during operation. The best way is to wait for the fan to st
op
befor
e turning main power off.
Do not touch the air outlet grille and bottom plate which become hot.
Clean the air filter frequently. The temperature inside may rise and cause
dam
age when the filter/ventilation slots are clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hu
rt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on
.
Do not block the projector lens with any object when the projector is
un
der operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily
turn off the light source,
press HIDE
on the remote control.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projecto
r
and
ensure it is securely installed.
The projector should be placed in a horizontal way by means of desktop or
ceilin
g mount mode only, and its tilt angles should not exceed 6 de
grees,
othe
rwise it would cause dramatical decrease of lamp life or severe safety
concern of system malfunction.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer PD1330W Series and is the answer not in the manual?

Acer PD1330W Series Specifications

General IconGeneral
BrandAcer
ModelPD1330W Series
CategoryProjector
LanguageEnglish

Related product manuals