Acer Predator 15 - System Restore and Service Information

68 - Frequently asked questions
I want to restore my computer to its original settings.
This recovery process helps you restore the C: drive with the
original software content that is installed when you
purchased your computer.
Before performing a restore operation, please check the
BIOS settings.
1. Check to see if Acer disk-to-disk recovery is enabled or
not.
2.Make sure the D2D Recovery setting in Main is Enabled.
3.Exit the BIOS utility and save changes. The system will
reboot.
For more information, see Restoring your computer on
page 23.
Requesting service
International Travelers Warranty (ITW)
Your computer is backed by an International Travelers
Warranty (ITW) that gives you security and peace of mind
when traveling. An ITW passport came with your computer
and contains all you need to know about the ITW program. A
list of available, authorized service centers is in this handy
booklet. Read this passport thoroughly.
Note
If your system is the multilingual version, the operating system
and language you choose when you first turn on the system will be
the only option for future recovery operations.
Warning
Your C: drive will be reformatted and all data will be erased. It is
important to back up all data files before using this option.
Note
To activate the BIOS utility, press <F2> when you see the Acer logo
during boot up.