Acer Predator X38P User Manual

X38 User Guide English 4
Wall Mounting
Preparing to install an optional wall mount arm.
2
3
1
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect
power before this procedure. Follow these steps:
1. Remove the base.
2. Follow the manufacturer's instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the
arm with the holes in the back of the monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user's manual that came with the optional wall
mounting arm for instructions on attaching it to the wall.
Note: VESA mounting screw holes are not available for all models, please check with the
dealer.

Acer Predator X38P Specifications

General

Display diagonal	37.5 \
Display resolution	3840 x 1600 pixels
Display technology	QLED
Native aspect ratio	21:9
Maximum refresh rate	175 Hz
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Display brightness (typical)	450 cd/m²
Supported graphics resolutions	3840 x 1600
Product color	Black
Market positioning	Gaming
USB hub version	2.0 / 3.2 Gen 1 (3.1 Gen 1)
Built-in USB hub	Yes
DisplayPort version	1.4
Headphone connectivity	3.5 mm
Number of upstream ports	1
USB Type-A downstream ports quantity	4
AC input voltage	100 - 240 V
Annual energy consumption	109 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	75 W
Cable lock slot	-
Tilt angle range	-5 - 35 °
Panel mounting interface	100 x 100 mm
RMS rated power	14 W
Number of speakers	2
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	289.8 mm
Height (with stand)	591.8 mm
Weight (with stand)	9480 g
Depth (without stand)	120.6 mm
Width (without stand)	897 mm
Height (without stand)	394.5 mm
Weight (without stand)	6460 g