Acer R240HYbidx User Manual

English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1 To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this
range may result in permanent damage.
6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
LCD
monitor
Quick start
guide
VGA
cable
AC
Adapter
AC Power
cord
HDMI cable
(Optional)
DVI cable
(Optional)
Audio cable
(Optional)
Adjusting the monitor base
1 Carefully remove the monitor from its packaging.
• The monitor base is attached onto the monitor before shipment and it is undetachable.
2 Pull the monitor base out fully so that the monitor can be placed on a stable surface in the upright position.
3 Secure the monitor base by turning the white screws (at the bottom of the base) using the integrated tab or a suitable coin.
Connecting your monitor to a computer
1 Turn off your computer and unplug your computer’s power cord.
2 Connect the signal cable to the VGA and/or DVI-D (optional) and/or
HDMI input socket of the monitor, and the VGA and/or DVI-D (optional)
and/or HDMI output socket of the graphics card on the computer.Then
tighten the thumbscrews on the signal cable connector.
3 Connect one end of the adapter to the monitor and the other end to a
properly grounded, AC outlet.
4 Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
5 Connect the audio cable (Optional).
Connect an audio cable to the audio port of the monitor.
Panel controls
No. Item Description
1 Power button/
indicator
Turns the monitor on/off. Blue indicates power
on. Blinking blue indicates standby/power saving
mode.
2
<
/
>
button Press the
<
/
>
button to navigate to the desired
function or to change the settings of the current
function.
3 Menu/Enter
button
Press to view the OSD menu. Press it again to
enter a selection in the OSD menu.
4 Auto/Exit button • When the OSD menu is active, press this
button to exit the OSD menu.
• When the OSD menu is inactive, press
this button to activate the Auto Adjustment
function.
5 Empowering
Key
Press this button to open the Acer eColor
Management OSD and access the scenario modes.
VGA INDVI-INHDMI
AUDIO IN
DVI
HDMI
VGA
AUDIO IN
VGA INDVIHDMI DC IN
HDMI
HDMI
AUDIO
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
1234
5

Acer R240HYbidx Specifications

General

Brand	Acer
Model	R240HYbidx
Category	Monitor
Language	English

Summary

Important Safety Instructions

Package Contents

Adjusting the Monitor Base

Connecting Your Monitor to a Computer

Panel Controls

Power Button and Indicator

Turns the monitor on/off. Blue indicates power on. Blinking blue indicates standby/power saving mode.

Navigation Buttons

Press the < / > button to navigate to the desired function or change settings.

Menu and Enter Button

Press to view OSD menu. Press again to enter selection. Used to exit menu or activate auto adjustment.

Auto/Exit Button

When OSD menu is active, press to exit. When inactive, press to activate Auto Adjustment.

Empowering Key

Press to open Acer eColor Management OSD and access scenario modes.

Regulations and Safety Notices

FCC Notices

Device tested for compliance with Class B digital device limits per FCC Part 15 rules.

CE Declaration of Conformity

Acer declares LCD monitor compliance with essential requirements of EMC, Low Voltage, RoHS, and Ecodesign directives.

Shielded Cables Notice

All connections to other computing devices must use shielded cables for EMC compliance.

Peripheral Devices Notice

Only peripherals certified to Class B limits may be attached to prevent interference.

Caution on Modifications

Unauthorized modifications may void user authority granted by the Federal Communications Commission.

Operation Conditions

Device complies with FCC Part 15, subject to conditions of no harmful interference and acceptance of received interference.

Canadian Users Notice

Apparatus complies with Canadian ICES-003 standard for digital apparatus.

Waste Equipment Disposal

Instructions for proper disposal of waste electrical and electronic equipment in the EU for recycling.

Handling Precautions

Do not lift the monitor by its base to prevent damage.

ENERGY STAR Program

ENERGY STAR Benefits

Qualified products save money, protect environment by reducing energy costs and greenhouse gas emissions.

ENERGY STAR Features

Products use less energy, prevent greenhouse gas emissions, meet strict efficiency guidelines.

Product Sleep Modes

Automatically enter 'display sleep' after 15 mins, 'computer sleep' after 30 mins inactivity.

Wake-up Functionality

Monitor wakes from 'Active Off' mode by moving mouse or pressing any keyboard key.